39
6.0 PROGRAMMING AND SET UP
- Press the key to display CLEANING COUNTER.
- Press
to activate automatic cleaning counter.
- Push group button to display number of wash cycles carried out.
- Press the
key for 3 seconds to reset count total.
4. Active Groups
It is possible to set groups on the machine as ‘active’ and ‘inactive’ when machine is switched on. Only
groups selected as ‘active’ will be heated to temperature and ready for use.
- Press
to activate ACTIVE GROUPS function.
- Individual units can be activated and deactivated by pressing the
or keys.
- Press
to conrm group and pass on to the next group.
- Once last group is conrmed the function returns to the technical menu.
- Press the
key to return to standby mode. Any changes will not be saved.
5. On/Off Program
- Press
to activate on/off standby mode for machine.
- On/off values indicated when the machine will turn on and off.
- Use the
or keys to program day.
- Press
to change the start up time for machine. Machine will ash ON XX:XX
- Use the
or keys to adjust the starting up time.
To Next Page
Loading...