40
- Press to conrm start time and change switch off time. Machine will ash OFF XX:XX.
- Use the
or keys to adjust the switch off time.
- Press
to conrm switch off time.
- To deactivate the on/off function on allocated day press
key. Machine will read DAY OFF.
- To reinstate press
key.
Note: Date/Hour function must be programmed to correct time to ensure accurate ON/OFF
settings.
6. Energy Saving
This function allows the machine the enter an active STANDBY status where it is possible to choose
whether to switch off the machine completely or keep it at a set pressure (i.e. lower than working
pressure) while not in use for a period of time.
- Press
to activate ENERGY SAVING XXX menu.
- From here it is possible to select the XXX mode using the
or keys.
The four operating modes are:
1. OFF: During standby the machine is switched off and the display reads OFF.
2. STANDBY 0.10 bar: During standby, the machine maintains a pressure of 0.10 bar and the display
reads LOW CONSUMPTION.
3. STANDBY 0.50 bar: During standby, the machine maintains a pressure of 0.50 bar and the
6.0 PROGRAMMING AND SET UP
To Next Page
Loading...