AREMDE NEXUS - Temperature and Fault Management

41
display reads LOW CONSUMPTION.
4. STANDBY 0.80 bar: During standby, the machine maintains a pressure of 0.80 bar and the display
reads LOW CONSUMPTION.
- Press
to conrm the mode selected on the display and return to previous menu.
- Press the
key to go back without conrming.
Note: This type of operation is possible when switching the machine on/off manually using the
key and when switching the machine on/off automatically using the ON/OFF programming
function. If the
key is pressed while the machine is in one of the standby conditions (0.10
bar, 0.50 bar, 0.80 bar), the machine switches to OFF. If the
key is pressed again the
machine enters the ON mode.
7. Setpoint Temperature (Groups)
- Press
to access set point temperature adjustment.
- Use the
or keys to adjust the temperatures of the boilers and the groups.
SETP G1: Group 1 temperature
SETP C1: Boiler 1 temperature
SETP G2: Group 2 temperature
SETP C2: Boiler 2 temperature
SETP G3: Group 3 temperature (on three group models)
SETP C3: Boiler 3 temperature (on three group models)
6.0 PROGRAMMING AND SET UP