AREMDE NEXUS - Page 43

43
- Use the or keys to conrm the following cases:
- If ACTIVE is selected, this returns to the main menu.
- If NOT ACTIVE is selected, this opens the DELIVERY TIME function, display will read: TIMER,
PERMANENT, NOT ACTIVE.
- Use
or keys to select XXX as:
NOT ACTIVE (pouring times will not be shown)
ROW 1 (pouring times will show in row 1)
ROW 2 (pouring times will show in row 2)
- Press
key to conrm and pass to the next step.
- Press
key to return to the previous page without conrming.
Note: If temperature has been activated to show on the main display it will display the
following information:
a) The current unit temperature.
b) LOW: the temperature of the unit is below 70°C.
c) N.C.: the temperature probe is not connected.
d) C.C.: the temperature probe has short circuted.
11. Delivery In Wash
This function enables the user to use pour functions on other group while wash cycle is activated.
- Press
to activate menu.
- Use
or keys to select ACTIVE/ NON ACTIVE for each group.
6.0 PROGRAMMING AND SET UP