41Tensor
13.2 Mains lter
Only active at alternating voltage supply.
The digital input lter suppresses ripple voltage and faults on the inputs 2/3 at 50/60 Hz AC operation. The supply voltage func-
tions as reference. The lter can only be set if a 7-segment display is present. For Selection of menu item FI see bullet point 6.
FI Switching threshold
0 OFF
1 50%
2 60%
3 70%
4 80%
5 90%
Example:
Menu status 1=50%, i.e. at a supply voltage of e.g. 230 V AC voltages below 115 V AC will not be processed at the inputs 2/3.
14. Maintenance
14.1 Service
ARIS actuators of type Tensor have a lifetime lubrication and are generally maintenance-free.
14.2 Accessories
No special tools are required for installation.
14.3 Spare parts
Order spare parts at aris@stellantriebe.de any time.
Please always state the serial number of the actuator.
Fi
To Next Page
Loading...
Need help?
General
