Arris DCX3600 - Table 6 - Remote Control Test; Operational Check for the Remote Control

Installation
Set-Top Entertainment Hub DCX3600-M • User Guide 24
365-095-25659 x.1
2. "UnPr" will be displayed on the front panel display during the un-pairing process.
3. "FAIL" will be displayed on the front panel display for five (5) seconds if the un-
pairing process failed.
Operational Check for the Remote Control
The operational check will test the remote control.
Table 6 – Remote Control Test
Feature Testing Procedure
Power ON Press
Power
on the remote control to turn ON the DCX3600-M.
Channel Selection Scan through the channels using the
Channel Up or Down
keys.
Tune to several channels by entering the channel number using the numeric keys.
Volume Control Press
Volume Up or Down
to increase or decrease the volume.
Press
Mute
to turn the sound off. Press
Mute
again to restore the sound.
If the DCX3600-M does not operate properly, refer to Troubleshooting for more information.