Arris DCX3600 - Page 34

Installation
Set-Top Entertainment Hub DCX3600-M • User Guide 27
365-095-25659 x.1
Setting Description
• Normal – Enables moderate dynamic range which is most appropriate when a receiver
is connected to the STB over baseband or digital outputs.
• Wide – Enables the complete dynamic range to be reproduced on all outputs, which is
most suitable for advanced users who have high quality speakers and audio
equipment.
Audio Output Sets the audio output to a fixed or variable setting. The fixed setting produces a constant
output level from the set-top (recommended when connected to an external receiver).
This setting does not apply to the Audio Out (Fixed) connector.
3D Mode
Selections are Enabled or Disabled.
Enabled – The “D” key on the remote toggles 3D graphics display modes through the
settings, 2D, 3DTB, and 3DSS.
Disabled – The “D” key on the remote is disabled. The 3D graphics display mode is set by
the signal of the selected program.
Video Sharpness
Adjusts the picture sharpness when viewing a standard-definition (SD) program. The Video
Sharpness setting affects all of the video outputs. By default, the sharpness level of 3 is
selected. The DCX3600-M supports five distinct levels of video picture sharpness. A value
of 1 corresponds to a "softer" picture while a value of 5 corresponds to a "sharper"
picture. The best sharpness setting depends upon the video connection being used, the
display quality of the TV, and personal preference.
RF Output Channel
The default selection is channel 3.
Power ON Timer The designated time for the set-top to power on.
Status This selection disables or enables the Power ON Timer.
Day Option When enabled, this selection indicates when the Power ON Timer is active. Choices are
Weekends, Weekdays, Every Sunday, Every Monday, Every Tuesday, Every Wednesday,
Every Thursday, Every Friday, or Every Saturday.
Set Time
• 12-hour clock
• AM/PM
Power OFF Timer The designated time for the set-top to power off.
Status This selection disables or enables the Power OFF Timer.
Day Option When enabled, this selection indicates when the Power OFF Timer is active. Choices are
Weekends, Weekdays, Every Sunday, Every Monday, Every Tuesday, Every Wednesday,
Every Thursday, Every Friday, or Every Saturday.
Set Time • 12 hour clock
• AM/PM
Sleep Timer Off/On