Arrow MAX1000 - Peripherals Connected to the FPGA; Leds; Figure 5 - LED Connections

MAX1000 User Guide www.arrow.com
Page | 11 July 2017
3.3 Peripherals Connected to the FPGA
3.3.1 LEDs
There are eight red user-controllable LEDs connected to the FPGA. Each LED is driven directly and
individually by the MAX10 FPGA; driving its associated pin to a high logic level for on or low logic
level for off.
Board Reference
FPGA Pin No.
I/O Standard
LED1
PIN_A8
3.3 V
LED2
PIN_A9
3.3 V
LED3
PIN_A11
3.3 V
LED4
PIN_A10
3.3 V
LED5
PIN_B10
3.3 V
LED6
PIN_C9
3.3 V
LED7
PIN_C10
3.3 V
LED8
PIN_D8
3.3 V
Figure 5 – LED Connections