Need help?Do you have a question about the ARVOO ITS101 and is the answer not in the manual?
General| Brand | ARVOO |
|---|---|
| Model | ITS101 |
| Category | Security Camera |
| Language | English |
Details the 3-pin power connector, input voltage range, and recommended power supply.
Describes the two small signal relay outputs and their limitations for switching applications.
Explains the optional RS-232 port functionality and provides its pin-out details.
Details the 6-pin GPIO connector, its pin-out, and input/output specifications.
Explains how to configure I/O behavior through the web service interface.
Covers the RJ-45 connector and Cat5e cable for LAN connectivity.
Describes the proprietary digital interface for connecting the ARVOO ANPR camera.
Details the analog video input using a BNC connector for standard cameras.
Explains the video output for service and states the USB port is for ARVOO use only.
Provides a procedure to reset network settings to factory defaults if access is lost.
Details how to change the unit's IP address and configure Ethernet LAN settings.
Covers securing communications with OpenVPN and setting up the server.
Describes how to set date and time using NTP servers or manually.
Lists the key features and specifications of the ARVOO digital ANPR camera.
Explains the adjustable settings for the ITS101-CAM via the web interface.
Covers support for analog ANPR cameras and their configuration options.
Details ANPR algorithm, ROI, XML output, and other application settings.
Guides users on how to install or upgrade the unit's firmware.
Details power requirements, consumption, and supply voltage for the ITS101.
Describes the function and color of each LED on the ITS101 front panel.
Specifies the operating temperature, storage temperature, and humidity limits.
Provides the physical dimensions and weight of the ITS101 and its camera.
Explains the meaning of the ten LEDs on the front panel for system status.
Offers suggestions for diagnosing and fixing communication issues.
Discusses firewall settings for ANPR viewer and OpenVPN access.
Addresses common faults and solutions for OpenVPN connection issues.
Lists issues affecting ANPR performance and image inspection.
Covers problems caused by dirty cameras and incorrect placement for recognition.
Discusses problems related to dirty number plates and vehicle movement (stop/go).
Covers detection latency and how to contact ARVOO Support for further assistance.
Identifies web service pages for viewing firmware version and log data.
Defines key technical terms and acronyms used throughout the manual.
To Next Page