ITS101 Installation Manual
1. Introduction
This document describes how the ITS101 has to be installed and configured.
The ITS101 is an automated number plate recognition system for access control applications.
The end user is provided with usable license plate recognition data. The unit handles a number
of I/O's – for instance based on license plate black/white listing – for access control purposes.
The front end of the ITS101 consists of an ANPR camera. ANPR cameras differ from normal
CCTV cameras in that they are specifically designed to capture good, clear images of infrared-
reflective license plates in all weather conditions, day or night. In most conditions only the
license plate will be visible when using an ANPR camera, only on very sunny days other
elements of the surroundings will be visible. The ANPR camera can either be an analog camera
or an ARVOO digital camera.
The images from the ANPR camera are processed using the Intrada ANPR software that is
embedded onto the processing board. Images from the ANPR camera are scanned for license
plates and then optical character recognition algorithms are applied. The end product is license
plate recognition data in the form of a text string, packed in an XML protocol. Together with
this the board handles a number of I/O's for access control purposes.
The ITS101 is meant to be used for stop and go situations. This means that the vehicle must
come to a stand-still in order to give the ITS101 sufficient time to read the license plate.
The ITS101 is running a web service that can be accessed via a standard web browser. This
allows to configure the network, retrieve diagnostic information and perform firmware control.
ARVOO Imaging Products B.V. page 4 of 33
To Next Page
Loading...