AS MOTOR AS 62 E-Allmaher - Maintenance Overview

33
Maintenance overview
Component Action Maintenance
interval
A B
Device Check for safe working condition (basic inspection). ■ ▲
Clean. ■
Customer service. ▲
Batteries and char-
gers
Check batteries and chargers. ■ ▲
Check battery status,. Charge batteries. ■ ▲
Air filter Maintain. ■ ■▲
Blade and fastening
components
Check for wear and damage. See chapter Checking the
blade.
■ ▲
Change. ▲
Blade brake clutch Does the blade function safely and does the blade stop in
7seconds?
□ ▲
Release the drive
lever
Does the device stop when the lever is in zero position? □ ▲
Drive Check. ■ ▲
V-belt Are the belts tensioned correctly, without fissures, and in
good condition?
▲
Bowden cables Check for proper function and ease of movement. ■ ▲
Chassis and impact
protection
Check for rust and fissures and check the welding seams. ■ ▲
Are all protective devices and covers in place, fastened cor-
rectly and properly functioning?
■ ▲
Label Condition of the labels. ■ ▲
Parking brake Check. ■ ▲
Engine, batteries,
and chargers
For reliable information, see the operating instructions for
the engine, the batteries and the chargers.
■ ▲
Flammable material Remove easily flammable debris buildup from the engine
and the device.
■ ▲