39
Original blade
An original AS-blade is engraved with:
AS XXXXXXXX
The engraving shows the spare part number.
Checking the blade clutch
Check the blade clutch for proper function by
disengaging the blade. The blade must come
from full speed to a standstill in less than
7seconds. Contact an authorised service
centre if this is not the case.
Assembly
Scope of delivery
The device is shipped in a carton.
The scope of delivery includes:
– The device.
– This operating manual.
– Manufacturer’s certificate.
– Operator’s manual of the engine manufac-
turer.
Unpacking
1. Open the box at the top.
2. Remove all loose parts from the box.
3. Cut open the front side of the box.
4. Fold up the handlebar (see Unfolding the
device).
5. Check the air pressure of the tyres (see
Technical data).
6. Press the brake bar towards the handle-
bar to release the brake and push the
device out of the box.