AS MOTOR AS 62 E-Allmaher - Page 45

45
Technical specifications
Type AS 62 E-Allmäher AS 63 E-Allmäher
Range of application (temperature) 5 - 30°C
Observe the information of the engine manufacturer.
Engine
Type
Manufacturer
Type
Maximum engine performance
Speed Eco
Speed turbo
Voltage
Type of voltage
Protection level
Electric engine
EGO Power Plus
PU2700S
3,47kW
2800 min
-1
3000min
-1
56V
Direct voltage
IPX5
Battery (not included in delivery) See operating instructions and battery nameplate.
Charger (not included in delivery) See operating instructions and charger nameplate.
Cutting device, type
Cutting height
2 knives (cross knives)
50, 65, 80, 100mm, per axis
Growth height up to approx. 90 cm
Cutting width 61 cm
Traction drive Rear wheel drive with Vario-
mat for variable speed ad-
justment (1,8 - 4,0km/h)
Rear wheel drive with Vario-
mat for variable speed ad-
justment (1,6 - 3,6km/h)
Maximum area coverage ca. 2400m
2
/h ca. 2100m
2
/h
Measures and weights
Transport size with packaging L/W/H
max. operating dimensions L/W/H
Weight (without battery)
102/72/78 cm
191/70/99 cm
68 kg
102/72/78 cm
191/70/99 cm
74 kg
Approved batteries and chargers See operating manual of the engine manufacturer.
Sound level
according to DIN EN 12733 / for
Measured sound level L
WA
Sound level at working place L
pA
Measurement uncertainty k
3000min
-1
83,0dB(A)
70,6dB(A)
3,0dB(A)
3000min
-1
82,7dB(A)
70,4dB(A)
3,0 dB(A)
Vibration emission value
according to DIN EN 12733 / for
Hand-arm-vibrations a
h,W
Measurement uncertainty U
3000min
-1
0,5 m/s
2
1,0 m/s
2
3000min
-1
1,4 m/s
2
1,0 m/s
2
Tyre pressure rear - 1,0 - 2,0 bar