Doc ID : ADR111A_IM_01
Ref ID : ADR111A/IM/SGI
Rev No. : 04
Page No. : 9 of 127
ADR111A /
ADR211A
Environment
The equipment is intended for indoor installation and use only. If required to be used in an
outdoor environment, then it must be mounted in a specific cabinet or housing which will
enable it to meet the requirements of IEC 60529 with the classification of degree of
protection IP52 (dust and splashing water protected).
Pollution Degree 2 Compliance is demonstrated by reference to safety standards.
Altitude Operation up to 2000m
IEC 60255-27:2005
EN 60255-27: 2005
CE MARKING
Directives:
Compliance demonstrated by reference to safety standards
To Next Page
Loading...
