Need help?Do you have a question about the Ashida ADR141C and is the answer not in the manual?
Lists the main protection functions including Over Current, EF, Trip Circuit Supervision, etc.
Details the Over Current and Earth Fault element, including stages and curves.
Lists detailed specifications like current input, aux supply, temperature range, contacts, etc.
Explains the LCD display, touch keys (arrow keys, LED/HW Reset) for interaction and settings.
Describes the 4 dual-colour LEDs (ON, PKP, FAULT, TRIP) and their meanings.
Step-by-step guide to entering the current password and setting a new password.
Procedure for clearing the password if forgotten, involving HW RESET and LED RESET/EDIT keys.
Describes the initial screens displayed after power-on or hardware reset.
Lists the available main menu options and how to navigate through them using arrow keys.
Explains how to access and view details within each main menu item like Primary Current, General Settings, etc.
Step-by-step guide to navigate and display primary current readings for R, Y, B, and 3lo.
Detailed steps for setting parameters like New Password, Unit ID, CT Sec., CT Primary, etc.
Procedure to view the previously set general parameters including Unit ID, CT settings, BF Enable, etc.
Step-by-step guide to configure overcurrent and earth fault settings like enable, range, TMS, and curves.
Procedure to view the configured relay settings for IP>, IP>>, 3lo>, 3lo>>, and curve types.
Step-by-step guide to configure Cold Load settings for IP> and 3lo> parameters.
Procedure to view the configured Cold Load settings for CL Enable, CL Timer, and current settings.
Explains how to assign protection functions and digital inputs to relays (RL1-RL4) and LEDs.
Procedure to set Relay/LED configurations, including password, Load Fact Set, and individual bit assignments.
Procedure to view the configured settings for relays and LEDs, including Load Factory settings.
Step-by-step guide to access and view trip test data, including trip flags, current values, and fault timestamps.
Detailed steps to access and display fault 1 data, including trip flags, current readings, and timestamps.
Procedure to access and display the relay's event log, including navigation for previous/next events.
Step-by-step guide to access and display the error log for relay diagnostics.
Procedure to access and display status information like CB status, trip circuit health, and version details.
Step-by-step guide to set the Hours, Minutes, Seconds, Date, Month, and Year for the relay.
Procedure to view the currently set date and time parameters on the relay.
Step-by-step instructions to display secondary current readings for R, Y, B, and 3lo.
Visual guide showing the navigation steps to view primary current readings.
Visual guide for setting and viewing general parameters like password, Unit ID, and CT settings.
Visual guide for setting and viewing relay parameters such as IP>, IP>>, 3lo>, 3lo>>, and curves.
Visual guide for setting and viewing Cold Load parameters like CL Enable, CL Timer, and current settings.
Visual guide for setting and viewing relay and LED configurations, including bit assignments.
Visual guide showing the navigation path to view trip test information, including trip flags and fault data.
Visual guide showing navigation to view fault data, specifically Fault 1 and Fault 2.
Visual guide showing navigation to view the relay's event log.
Visual guide showing navigation to view the relay's error log for diagnostics.
Visual guide showing navigation to view the relay's status information.
Visual guide for adjusting and viewing date and time settings on the relay.
Visual guide showing navigation to view secondary current readings.
Provides an overview of data capture for fault analysis, measurement value, event value, and fault history.
Answers common questions about events, reading events via SCADA, RS485 port, and Relay Talk software.
Details the functions of buttons on the main screen for initializing, refreshing, settings, history, reset, and status.
Details functions for viewing fault buffer, reading faults, refreshing, clearing, saving, and closing the history window.
Enables viewing and editing of general parameters like CT settings, BF Enable, and Baud Rate.
Allows viewing and editing of parameters in different banks for relay settings.
Presents test data for Phase and 3IO pick-up values and tolerances.
Shows operating time test results for Phase and 3IO at different current levels and TMS settings.
Details HF Time Delay test settings and observed delays for Phase and 3IO.
Details Definite Time Delay test settings and observed delays for Phase and 3IO.
Presents test results for Breaker Fail (LBB) time tests with different delay settings.
To Next Page
General