15
2. Getting Started
Introduction
This section contains information for the unpacking, inspection, preparation for use and storage
of your Associated Research, Inc., product.
2.1. Unpacking and Inspection
2.1.1. Packaging
Your instrument was shipped in a custom foam insulated container that complies with ASTM
D4169-92a Assurance Level II Distribution Cycle 13 Performance Test Sequence
If the shipping carton is damaged, inspect the contents for visible damage such as dents,
scratches or broken display. If the instrument is damaged, notify the carrier and Associated
Research's customer support department. Please save the shipping carton and packing material
for the carriers inspection. Our customer support department will assist you in the repair or
replacement of your instrument. Please do not return your product without first notifying us
and receiving an RMA (return material authorization) number. To receive an RMA number,
please contact our customer support department at (1-800-858-8378).
2.1.2. Contents of the Carton
Inside the carton should be the following:
High Current Output Cable
High Current Return Cable
37999, 15A Fast-Blow 250VAC
33541 Standard (7704 only)
*The Adapter Box and Line Cord listed are American. Other combinations of Line Cord and
Adapter Box are available upon request.
Only accessories which meet the manufacturer’s specification shall be
used.
2.2. Installation
To Next Page
Loading...
Need help?
General
