80
9. Options
Introduction
This section contains a list and descriptions of available factory installed options at the
time of this printing.
Option Label
If your instrument has been modified with options, there will be an option label on the
rear panel of the unit. The option label contains an option(s) code that may be cross-
referenced to the Options List.
For example your options code would appear as follows:
fitted with option 03 ..............................................................
fitted with option 03 and 06....................................................
7700, 7704 Options
Option List
High Resolution IR Megohm meter (50K)
Dual Remote Test Switches
To Next Page
Loading...
Need help?
General
