53
Use the Numeric keys to enter the GPIB Address number, then press the ENTER key and
the display will show the current address immediately.
Press the SETUP key to advance to the Contrast setting, or press the EXIT key to exit
from the address setting to the operation mode. The program will store the address
setting automatically.
LCD Contrast setting
Press the Setup key to advance the menu to the Contrast parameter. The display will
show:
Contrast = X
Range : 1 - 9 9 = High
Use the Numeric keys to enter the LCD Contrast level, then press the ENTER key. The
program will change the LCD Contrast immediately when the ENTER key is pressed, so
the setting can be viewed.
Change the LCD Contrast again or press the SETUP key to advance to the Volume
setting, or press the EXIT key to exit from the LCD Contrast setting to the operation
mode. The program will store the Contrast setting automatically.
The LCD Contrast level is from 1 - 9, a total of 9 levels. Level 1 is the lowest contrast
and level 9 is the highest contrast.
Audible Alarm Volume setting
Press the Setup key to advance the menu to the Volume parameter. The display will
show:
Volume = X
Range : 0 - 9 0 = OFF 9 = High
The Audible Alarm Volume level is from 0 - 9, a total 10 levels. Level 0 is used to
disable the Audible Alarm. Level 1 is the lowest volume and level 9 is the loudest.
Use the Numeric keys to enter the Audible Alarm level, then press the ENTER key. The
program will provide a sample sound for checking immediately when the ENTER key is
pressed.
Change the Volume again or press the SETUP key to forward to the Fail Stop selection
program, or press the EXIT key to exit from the Audible Alarm setting to the operation
mode. The program will store the Volume setting automatically.
To Next Page
