3. Device installation and start-up
PHG 700C / 701C User Manual Page 14 of 47
Figure 3.10. Screen view – date and time edition
3.2.3.2 Sounds
The user may configure settings of acoustic signals, which occur during unit operation. Description of available
configuration options:
• Keys sound
• Sound during treatment
• End of treatment sound
• Warning sounds
• Initial sound
In order to set the appropriate option, select or clear the selection field by its pressing.
3.2.3.3 Volume
The user may adjust sound volume level. To perform this action:
• press the volume bar at desired place, or
• use buttons on the screen, or
• use keys
3.2.3.4 Display
The user may adjust display brightness level. To perform this action:
• press the value bar at desired place, or
• use buttons on the screen, or
• use keys
3.2.4 Functional settings
3.2.4.1 Channel operation mode selection
This function allows the user to set preferred style of unit operation.
Option Explanation
Manual mode – automatically
After therapy selection, the unit is set in manual mode operation.
Program mode – automatically
After therapy selection, the unit is set in program mode operation.
Mode selection pop-up
After therapy selection, the unit displays a window with a list of
operation mode selection options.
In order to set the appropriate option, select or clear the selection field by its pressing.
3.2.4.2 Program groups / medical fields
This function allows the user to set filters of available program mode options according to the preferred program
groups or medical fields. In order to set the appropriate option, select or clear the selection field by its pressing.
To Next Page
Loading...
