18
Software Drivers
Audio Setup
Running setup will give you the following wizard:
5. Select No... and click Finish in order to install
other drivers and utilities.
2. On the “Found New Hardware Wizard” screen,
click Cancel in order to use the audio setup program.
3. On the “Welcome” screen, click Next to begin
the setup wizard.
4. Wait while files are being copied to your hard
drive.
6. When the device driver is properly setup, it will
appear as the above in “Device Manager”.
1. Normally, you will get a “Found New Hardware
Wizard” as shown on the next step. If not, double
click the Audio Controller with a question mark in
“Device Manager”.
To Next Page
Loading...
