46
Software Utilities
LiveUpdate Setup
Running setup will give you the following wizard:
1. On the “Welcome” screen, click Next after
confirming this is what you want to setup.
2. On the “Choose Destination Location” screen,
click Next to continue or you may first change
the destination folder.
3. On the “Select Program Folder” screen, click
Next to continue or enter a different folder name.
4. On the “Setup Complete” screen, click Finish.
NOTE: You cannot run this utility without
first installing “ATK0100”. You will be given
this message if you do not have the driver
installed.
To Next Page
Loading...
