Name: Asus SABERTOOTH 990FX R3.0
Brand: Asus
Rating: 4 (1 reviews)

To Next Page

To Previous Page

ASUS SABERTOOTH 990FX R3.0

2-17

Chapter 2

2.4 Starting up for the first time

1. After making all the connections, replace the system case cover.

2. Ensure that all switches are off.

3. Connect the power cord to the power connector at the back of the system chassis.

4. Connect the power cord to a power outlet that is equipped with a surge protector.

5. Turn on the devices in the following order:

a. Monitor

b. External SCSI devices (starting with the last device on the chain)

c. System power

6. After applying power, the system power LED on the system front panel case lights up.

For systems with ATX power supplies, the system LED lights up when you press the

ATX power button. If your monitor complies with the “green” standards or if it has a

“power standby” feature, the monitor LED may light up or change from orange to green

after the system LED turns on.

The system then runs the power-on self tests (POST). While the tests are running, the

BIOS beeps (refer to the BIOS beep codes table) or additional messages appear on

the screen. If you do not see anything within 30 seconds from the time you turned on

the power, the system may have failed a power-on test. Check the jumper settings and

connections or call your retailer for assistance.

Connect to 7.1 channel Speakers

Questions and Answers:

Need help?

Do you have a question about the Asus SABERTOOTH 990FX R3.0 and is the answer not in the manual?

Asus SABERTOOTH 990FX R3.0 Specifications

General

Chipset	AMD 990FX/SB950
CPU Support	AMD AM3+ FX/Phenom II/Athlon II/Sempron 100 Series Processors
CPU Socket Type	AM3+
Storage	6 x SATA 6Gb/s
SATA RAID	RAID 0, 1, 5, 10
Audio	Realtek ALC1150 8-Channel High Definition Audio CODEC
LAN	Intel I211-AT, 1 x Gigabit LAN Controller(s)
Form Factor	ATX
Dimensions	12 inch x 9.6 inch ( 30.5 cm x 24.4 cm )
Memory Support	4 x DIMM, Max. 32GB, DDR3 1866/1600/1333/1066 MHz, ECC, Non-ECC, Un-buffered Memory
Expansion Slots	1 x PCIe 2.0 x1 1 x PCI
USB Ports	12 x USB 2.0 (6 at back panel, 6 at mid-board)
Power Pin	24-pin ATX Power Connector, 8-pin ATX 12V Power Connector
Multi-GPU Support	Supports NVIDIA Quad-GPU SLI and AMD Quad-GPU CrossFireX Technology