Asus SABERTOOTH 990FX R3.0 User Manual

4-2
Chapter 4: Software Support
Chapter 4
The screenshots in this section are for reference only. The actual software manuals
containing in the support DVD vary by models.
Support DVD main menu
Shows the available device drivers
if the system detects installed
devices. Install the necessary
drivers to use the devices.
Click to display the applications
and other software that the
motherboard supports
Click to display product
related information
Contains the list of supplementary
user manuals. Click an item to
open the folder of the user guide
Click to browse the file list of the support CD
Click to display the ASUS contact information
Click to install the selected items
4.2.2 Obtaining the software manuals
The software manuals are included in the support DVD. Follow the instructions below to get
the necessary software manuals.
The software manual les are in Portable Document Format (PDF). Install the Adobe
®
Acrobat
®
Reader from the Utilities tab before opening the les.
To read about your motherboard’s software manual:
1. Run the Support DVD.
2. In the Support DVD main menu, click the Manual tab.
3. Click the software manual that you wish to read.

Asus SABERTOOTH 990FX R3.0 Specifications

General

Chipset	AMD 990FX/SB950
CPU Support	AMD AM3+ FX/Phenom II/Athlon II/Sempron 100 Series Processors
CPU Socket Type	AM3+
Storage	6 x SATA 6Gb/s
SATA RAID	RAID 0, 1, 5, 10
Audio	Realtek ALC1150 8-Channel High Definition Audio CODEC
LAN	Intel I211-AT, 1 x Gigabit LAN Controller(s)
Form Factor	ATX
Dimensions	12 inch x 9.6 inch ( 30.5 cm x 24.4 cm )
Memory Support	4 x DIMM, Max. 32GB, DDR3 1866/1600/1333/1066 MHz, ECC, Non-ECC, Un-buffered Memory
Expansion Slots	1 x PCIe 2.0 x1 1 x PCI
USB Ports	12 x USB 2.0 (6 at back panel, 6 at mid-board)
Power Pin	24-pin ATX Power Connector, 8-pin ATX 12V Power Connector
Multi-GPU Support	Supports NVIDIA Quad-GPU SLI and AMD Quad-GPU CrossFireX Technology