Asus SABERTOOTH 990FX R3.0 User Manual

ASUS SABERTOOTH 990FX R3.0
3-21
Chapter 3
CPU Core Activation [Auto]
This item lets user turn off cores except core 1, user can turn off 2nd, 3rd, 4th, 5th, etc core
manually. Conguration options: [Auto] [Manual]
The following items appear only when you set CPU Core Activation to [Manual].
3rd & 4th Core [Enabled]
Conguration options: [Disabled] [Enabled]
5th & 6th Core [Enabled]
Conguration options: [Disabled] [Enabled]
3.6.6 CPU Core On/Off Function
3.6.7 Onboard Devices Configuration
The conguration options for this section vary depending on the CPU you installed on the
motherboard.

Asus SABERTOOTH 990FX R3.0 Specifications

General

Chipset	AMD 990FX/SB950
CPU Support	AMD AM3+ FX/Phenom II/Athlon II/Sempron 100 Series Processors
CPU Socket Type	AM3+
Storage	6 x SATA 6Gb/s
SATA RAID	RAID 0, 1, 5, 10
Audio	Realtek ALC1150 8-Channel High Definition Audio CODEC
LAN	Intel I211-AT, 1 x Gigabit LAN Controller(s)
Form Factor	ATX
Dimensions	12 inch x 9.6 inch ( 30.5 cm x 24.4 cm )
Memory Support	4 x DIMM, Max. 32GB, DDR3 1866/1600/1333/1066 MHz, ECC, Non-ECC, Un-buffered Memory
Expansion Slots	1 x PCIe 2.0 x1 1 x PCI
USB Ports	12 x USB 2.0 (6 at back panel, 6 at mid-board)
Power Pin	24-pin ATX Power Connector, 8-pin ATX 12V Power Connector
Multi-GPU Support	Supports NVIDIA Quad-GPU SLI and AMD Quad-GPU CrossFireX Technology