3-22
Chapter 3: BIOS Setup
Chapter 3
Asmedia USB 3.0 Controller [Enabled]
[Disabled] Disables the controller.
[Enabled] Enables the front USB 3.0 controller.
Asmedia USB 3.1 Controller 1 [Enabled]
[Disabled] Disables the controller.
[Enabled] Enables the rear USB 3.1 controller.
Asmedia USB 3.1 Controller 2 [Enabled]
[Disabled] Disables the controller.
[Enabled] Enables the rear USB 3.1 controller.
Asmedia USB 3.1/3.0 Battery Charging Support [Disabled]
[Disabled] Disables this function
[Enabled] Enables the Asmedia USB 3.1/3.0 battery charging function.
USB Type C Power Switch [Auto]
[Auto] The system will automatically detect your USB Type C devices and provide
suitable power if needed.
[Enabled] The USB Type C port will always provide power to your devices.
Intel LAN Controller [Enabled]
[Disabled] Disables the controller.
[Enabled] Enables the Intel LAN controller.
The following item appears only when you set Intel LAN Controller to [Enabled].
Lntel LAN PXE Option ROM [Disabled]
This item allows you to enable or disable the Intel LAN PXE OPROM.
Conguration options: [Disabled] [Enabled]
RGB LED (onbaord) [Enabled]
[Enabled] LEDs will always light up at the S0 (Working), S3 (Sleep), and S5 (Soft off)
states, but not light up at the S5 state when the “ErP Ready” is enabled.
[Disabled] LEDs will not light up.
M.2 Bandwidth<PCIE> [x4]
When M.2 bandwidth is set to x4, PCIe16_2 will have no function.
Conguration options: [x4] [disable]