Asus SABERTOOTH 990FX R3.0 - Serial Port Configuration

ASUS SABERTOOTH 990FX R3.0
3-23
Chapter 3
Serial Port Configuration
The sub-items in this menu allow you to set the serial port conguration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM).
Conguration options: [Disabled] [Enabled]
The following item appears only when you set Serial Port to [Enabled].
Change Settings [IO=3F8h; IRQ=4]
This item appears only when you set the previous item to [Enabled] and allows you to
select the Serial Port base address.
Conguration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4]
[IO=2E8h; IRQ=3]
SB HD Azalia Configuration
HD Azalia Configuration
Allows you to change the HD Azalia conguration.
[Disabled] Disables the device.
[Enabled] Enables the High Denition Audio Azalia device.
The following items appear only when you set HD Audio Azalia Device to [Enabled].
Azalia Front Panel [HD]
Allows you to set the Azalia front panel audio connector (AAFP) type to legacy AC’97
or high-denition audio depending on the audio standard that the front panel audio
module supports.
[AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97
[HD] Sets the front panel audio connector (AAFP) mode to high denition
audio.
SPDIF Out Type [SPDIF]
[SPDIF] Sets to [SPDIF] for SPDIF audio output.
[HDMI] Sets to [HDMI] for HDMI audio output.