Asus SABERTOOTH 990FX R3.0 User Manual

ASUS SABERTOOTH 990FX R3.0
3-19
Chapter 3
The following item appears only when you set SATA Port1 - Port4 to [RAID].
Board SATA RAID ROM [Legacy ROM]
This item allows you to select Board SATA RAID ROM.
Conguration options: [Disabled] [Legacy ROM] [UEFI DRIVER]
SATA Port5 & M.2(SATA mode) [AHCI]
Allows you to set the SATA Port5 & M.2(SATA mode) mode.
Conguration options: [AHCI] [IDE]
• When the SATA Port1 - Port 4 and the SATA Port5 & M.2(SATA mode) items are
set to [AHCI], the information of the SATA connectors can be seen only under the OS
environment or during POST.
• The conguration options of SATA Port5 & M.2(SATA mode) will vary according to the
conguration option of the SATA Port1 - Port4.
The following item appears only when you set SATA Port1 - Port4 to [IDE] or [AHCI].
S.M.A.R.T. Status Check [Enabled]
[Disabled] Disables the S.M.A.R.T feature.
[Enabled] Enables the S.M.A.R.T feature.

Asus SABERTOOTH 990FX R3.0 Specifications

General

Chipset	AMD 990FX/SB950
CPU Support	AMD AM3+ FX/Phenom II/Athlon II/Sempron 100 Series Processors
CPU Socket Type	AM3+
Storage	6 x SATA 6Gb/s
SATA RAID	RAID 0, 1, 5, 10
Audio	Realtek ALC1150 8-Channel High Definition Audio CODEC
LAN	Intel I211-AT, 1 x Gigabit LAN Controller(s)
Form Factor	ATX
Dimensions	12 inch x 9.6 inch ( 30.5 cm x 24.4 cm )
Memory Support	4 x DIMM, Max. 32GB, DDR3 1866/1600/1333/1066 MHz, ECC, Non-ECC, Un-buffered Memory
Expansion Slots	1 x PCIe 2.0 x1 1 x PCI
USB Ports	12 x USB 2.0 (6 at back panel, 6 at mid-board)
Power Pin	24-pin ATX Power Connector, 8-pin ATX 12V Power Connector
Multi-GPU Support	Supports NVIDIA Quad-GPU SLI and AMD Quad-GPU CrossFireX Technology