EN 12
Setting the language and the clock
When the power is fi rst supplied to the oven, you must set the language and the time.
1
Turn the Multi-function Selector to
set the language. Press Next/Start to
confi rm.
2
Now you have to set the right time.
The ‘12’ will blink.
3
Example: to set 1:30.
Turn the Multi-function Selector to set
the hour of the day.
4
Press Next/Start to confi rm.
The ‘00’ will blink.
5
Turn the Multi-function Selector to set
the minute of the time and press Next/
Start to fi nish setting the clock. ‘30’ will
stop blinking.
6
The display shows the time of day.
The appliance is now ready to use.
If you want to change the time later
on, you can do this by pressing Menu
and choose ‘Time’ by turning the
Multi-function Selector and press
Next/Start. Then follow step 2-6 as
described on this page.
Automatic shut o (clock)
If the knobs of the oven are not operated for more than 10 minutes, the display will turn o
automatically for energy saving reasons. By operating any key, the display is switched on again.
If desired, this function can be turned o (see page 14; ‘Auto shuto ’).
BEFORE YOU BEGIN
To Next Page
Loading...
Need help?
General
