ATAGO CM-800A-DMF User Manual

14
6. Mounting the Sample Inlet Unit

WARNING
◇ Turn off the power (DC24V) before mounting. If AD-32 (AD-33 or
AD-34) is used, disconnect the power cable's plug from the AC
100-240V outlet before beginning.
Electrical shock may occur if the unit is mounted with the power
connected.

CAUTION
◇ Ensure that the prism is clean and free of any damage and/or
scratches. Completely remove any sample before installing the
instrument to piping or equipment
(1) Installation of the instrument with the sample inlet unit (optional):
Compression Fitting Hose connector
Straight type L type
Fig. 6-1

ATAGO CM-800A-DMF Specifications

General

Brand	ATAGO
Model	CM-800A-DMF
Category	Monitor
Language	English