Adding and registering handsets/headsets
Your telephone can support up to 12 DECT 6.0 cordless handsets
(AT&T model CL80114, sold separately) or up to ten cordless
handsets and two cordless headsets (sold separately). Visit
www.telephones.att.com/headsets for a list of compatible
DECT 6.0 cordless headsets. Each new handset or headset must be
registered to the telephone base before use. You must register each
handset or headset separately.
To register a cordless headset to this telephone system, please
refer to the user’s manual of the cordless headset for more details.
To register a cordless handset, see below.
The handsets provided within your product box are already
registered as HANDSET 1, and so forth. Additional handsets are
assigned numbers in the sequential order they are registered (up to
HANDSET 12).
Register a handset to the telephone base
1. Before you begin registration, make sure the
handset is out of the telephone base or charger
and shows To register HS, see manual.
2. Put the handset you wish to register on the
telephone base cradle.
3. The handset shows Registering... Please wait
and the IN USE light on the telephone base
turns on. HANDSET X Registered appears
on the handset screen ((HANDSET represents
the handset name, X represents the handset
number). The handset beeps and the IN USE
light turns off. The handset is now registered
with the telephone base.
Appendix
To register HS,
see manual.
Registering...
Please wait
HANDSET X
Registered
To Next Page
Loading...
Need help?
General
