AT&T CL82415 User Manual

Multiple handset use
38
Intercom
Use the intercom feature for conversations between two handsets.
You can purchase expansion handsets (model AT&T CL80114) for this
telephone base to expand your telephone system (up to 12 handsets).
Using a handset to initiate intercom calls:
1. Press MENU/
SELECT in idle mode to enter the main
menu. Press CID or DIR to scroll to Intercom, then
press
MENU/SELECT.
If you have a two-handset system, the handset
shows Calling other handset.
If you have more than two handsets, the handset
shows INTERCOM TO: Use the dialing keys
to enter a specific device number (enter a specific device number (1-9 for
handsets 1-9, TONE
followed by 0-2 for
handsets 10-12, or TONE followed by
#
for
all devices), or presspress 
CID or DIR to scroll to
the desired handset and press MENU/SELECT.
Your handset screen shows Calling HANDSET
X or
Calling all handsets.
The destination handset(s) rings and shows Other handset is
calling, HANDSET X is calling or HANDSET X is calling all
(HANDSET represents the handset name, X represents the handset
number).
2. To answer the intercom call, press PHONE/PHONE/FLASH, /SPEAKERSPEAKER
or any dialing key (0-9, TONE , or
#
) on the called device. Both
devices now show Intercom.
3. To end the intercom call, one party pressesTo end the intercom call, one party presses
OFF/OFF/CANCEL, or
place the handset back in the telephone base or charger. The. The The
other party hears four beeps. Both devices display Intercom
ended.
•
•
Calling
HANDSET X
HANDSET X
is calling
Intercom
11:35
AM
12/02

AT&T CL82415 Specifications

General

Brand	AT&T
Model	CL82415
Category	Telephone
Language	English