AT&T CL82415 User Manual

Telephone settings
25
Handset settings
Home area code
If you dial seven digits to make a local call (no area code required),
enter your area code into the telephone as the home area code.
When you receive a call from within your home area code, the
caller ID log only displays the seven digits of the telephone
number.
This feature makes it easy for you to place a call from the caller
ID log. If you dial ten digits to make a local phone call, do not use
this home area code feature. If you do, you cannot place local calls
from your caller ID log, as they will have only seven digits.
To set the home area code:
1. Press MENU/
SELECT in idle mode to enter the
main menu.
2. Use
CID or DIR to scroll to Settings, then
press MENU/SELECT.
3. Use CID or DIR to scroll to Home area code,
then press MENU/SELECT. The screen briefly
shows Only for 7digit dial from CID.
4. Use the dialing keys to enter a three-digit home
area code.
Press
MUTE/DELETE to delete a digit.
Press and hold
MUTE/DELETE to delete all digits.
5. Press MENU/SELECT to save. There is a confirmation tone and
the screen shows Area code will not show in CID briefly before
returning to the previous menu.
NOTE: If in the future, your telephone service provider requires you to dial ten
digits to make a local call (area code plus telephone number), you need to
delete your home
area code and dial out locally from the call ID log. With the home area code
displayed,
press and hold
MUTE/DELETE until the digits are deleted, and then press MENU/
SELECT.
The home area code is now restored to its default setting of _ _ _ (empty).
•
•
CID time sync
>Home area code
HOME AREA CODE
___

AT&T CL82415 Specifications

General

Brand	AT&T
Model	CL82415
Category	Telephone
Language	English