Directory
48
Create directory entries
Create a new directory entry
1. Press MENU/
SELECT in idle mode to enter the
main menu.
2. Press
CID or DIR to scroll to Directory, then
press
MENU/SELECT.
3. Press
CID or DIR to highlight Add contact.
4. Press MENU/SELECT.
5. Use the dialing keys to enter a telephone number
(up to 30 digits) when prompted.
Press
CID or DIR to move the cursor to the
left or right.
Press MUTE/DELETE to erase a digit.
Press and hold MUTE/DELETE to erase all
digits.
Press and hold
REDIAL/PAUSE to enter a three-
second dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing
REDIAL/PAUSE, then CID, DIR, or pressing or pressing
REDIAL/
PAUSE repeatedly to locate the number.
Press MENU/SELECT to copy the number.
6. Press MENU/SELECT to move on to the name.
The screen shows Number already saved if
the number is already in the directory. You
cannot save the same number twice.
7. Use the dialing keys to enter a name (up to
15 characters) when prompted. Each time you
press a key, the character on that key appears.
Additional key presses produce other characters on that key. See
the chart on next page.
Press
CID or DIR to move the cursor to the left or right.
Press 0 to add a space.
Press
MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press TONE to change the next letter to upper or lower case.
•
•
•
•
•
•
•
•
•
•
Answering sys
>Directory
Review
>Add contact
ENTER NUMBER
888-883-2445
_
Saved
ENTER NAME
Robert Brown_
To Next Page
Loading...
Need help?
General
