Multiple handset use
44
Push-to-talk (PTT)
Answer a PTT call
You can respond to a PTT call, as described below.
When your device receives a PTT call, it beeps and shows Press
and hold [PTT] to talk.
When the other party is speaking, your speakerphone light is
on, and your device shows PTT From HS X To HS X (the first
X represents the initiating handset number, and the second X
represents your handset number; a maximum of four handset
numbers appear).
When your speakerphone light is off (the screen shows Press
and hold [PTT] to talk), press and hold PUSH TO TALK on your
handset. You will hear a chirp. Speak towards the device.
While you are speaking, your device shows PTT To handset: X
(X represents the handset numbers of one or more destination
handsets; a maximum of four handset numbers appear).
Your voice is broadcast to all destination devices.
After speaking, release PUSH TO TALK. Your device will beep.
After the beep, if your speakerphone light is off, you can press
and hold PUSH TO TALK to continue speaking.
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
When your device shows Press and hold [PTT] to talk, press
MENU/SELECT. The screen shows Intercom.
Press MENU/SELECT. Your device displays Calling other
handset or Calling HANDSET X. The destination device briefly
shows Push to talk Ended and then Other handset is calling
or HANDSET X is calling. The destination device rings.
Press
PHONE/FLASH or any dialing keys (0-9,
#
or TONE ) on
the destination device to answer the intercom call. Both devices
now show Intercom.
To end the intercom call, press
OFF/CANCEL on your handset
or place the handset in the telephone base or charger. Both
screens show Intercom ended.
1.
2.
3.
•
•
1.
2.
3.
4.
To Next Page
Loading...
Need help?
General
