12
Getting started
Installation options
Wall mount to tabletop installation
1. Unplug the large end of the power adapter from the electrical outlet.
2. If the telephone line cord and power adapter cord are bundled,
untie them first. Slide the wall mount bracket up and remove it
from the wall mounting plate.
3. Unplug the telephone line cord or the DSL filter from the
telephone wall jack. Push the telephone base up and away from
the wall mount bracket to detach it from the wall mount bracket.
4. See Telephone base and charger installation on page 6.
To Next Page
Loading...
Need help?
General
