Telephone settings
26
Handset settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary)
service, you must change the dial mode to pulse dialing before
using the telephone.
To set the dial mode:
1. Press MENU/
SELECT in idle mode to enter the
main menu.
2. Use CID or DIR to scroll to Settings, then
press MENU/SELECT.
3. Use
CID or DIR to scroll to Dial mode, then
press MENU/SELECT.
4. Use CID or DIR to highlight Touch-tone or
Pulse, then press MENU/SELECT. There is a
confirmation tone and the screen returns to the
previous menu.
Web address
Use this feature to view the AT&T website address.
1. Press MENU/
SELECT in idle mode to enter the
main menu.
2. Use
CID or DIR to scroll to Web address,
then press MENU/SELECT.
Home area code
>Dial mode
DIAL MODE
>Touch-tone
>
Web address
Settings
www.telephones.
att.com
To Next Page
Loading...
Need help?
General
