Telephone operation
36
Options while on calls
Blind transfer
While on an outside call, you can transfer the call to a specific
device or any device without notifying them.
To transfer an outside call directly without
notifying the desired device:
1. During the call, press MENU/
SELECT.
2. Press MENU/SELECT again to choose Transfer.
If you have a two-handset system and no other
registered devices, the outside call is put on
hold and your handset shows Transferring
call... The other handset rings and shows
Transfer from other handset.
If you have other registered device(s) or
more than two handsets, your screen shows
TRANSFER TO: Use the dialing keys to enter aenter a
specific device number (1-9 for handsets 1-9,
TONE
followed by 0-2 for handsets 10-12, or
TONE followed by # for all devices), or presspress CID or DIR
to scroll to the desired device and press MENU/SELECT. The
outside call is put on hold and your handset screen shows
Transferring call... or Transferring call to all... The other
device rings and shows Transfer from HANDSET X (HANDSET
represents the handset name, X represents the handset
number).
3. To answer the call on the destination handset, press, press
PHONE/
FLASH, /SPEAKERSPEAKER, or any dialing key (or any dialing key (0-9, TONE or #). The The
initiating handset shows Call transferred and goes to idle mode.
NOTES:
To cancel the transfer and return to the external call before the blind transfer call is
answered, press
OFF/CANCEL, PHONE/FLASH or /SPEAKERSPEAKER on your handset.
If the other device does not answer the transfer within 30 seconds, the transfer ends
and the initiating device rings while showing No response to transfer. If it does not
pick up within 30 seconds, the device returns to idle mode and the outside call ends.
•
•
•
•
Phone 0:00:12
6:30
AM
8/06
>Transfer
Intercom
TRANSFER TO:
>Handset 2
To Next Page
Loading...
Need help?
General
