AT&T CL82415 User Manual

Answering system
73
Answering system settings
To record a new outgoing announcement:
1. When the handset is in idle mode, press MENU/
SELECT to enter
the main menu.
2. Press 
CID or DIR to scroll to Answering sys, then press MENU/
SELECT.
3. Press
MENU/SELECT again to select
Announcement.
4. Press
MENU/SELECT to select Record annc. The
system announces, “Record after the tone. Press 5
when you are done.”
5. Speak towards the handset to record your announcement. Press
5 to end recording. Your recorded announcement plays.
To listen to the recorded announcement again, scroll to Play annc
and press
MENU/SELECT.
To reset your outgoing announcement:
1. When the handset is in idle mode, press MENU/
SELECT to enter the
main menu.
2. Press CID or DIR to scroll to Answering sys, then press MENU/
SELECT.
3. PressPress MENU/SELECT again to select Announcement.
4. Press 
CID or DIR to scroll to Reset annc, then press MENU/
SELECT. The screen shows Reset to default annc? PressPress MENU/
SELECT again to confirm. The screen shows Annc. reset to
default before returning to the previous menu.
-OR-
Press 
CID or DIR to scroll to Play annc, then press MENU/
SELECT. While the announcement is playing, press MUTE/DELETE
to delete the announcement. The screen shows Annc. Deleted
before returning to the previous menu.
When your announcement is deleted, the system answers calls
with the default announcement described on page 72. You cannot
delete the default announcement.
>Record annc
Play annc

AT&T CL82415 Specifications

General

Brand	AT&T
Model	CL82415
Category	Telephone
Language	English