Trouble on One Voice Terminal
Step 7.
On both voice terminals, perform the action that revealed the trouble.
IF
THEN
The trouble appears on the voice
The handset is not causing the
terminal on which it first
trouble. Replace the handsets as
appeared,
they were and go to Step 8.
The trouble appears on the voice
Trouble found.
It is caused by
terminal that at first did not have
the
handset
on which the trouble
the trouble,
now appears.
Read the section on Maintenance
Exchange Procedures at the end of
this manual.
Step 8.
Switch the handset cord of the voice terminal on which the trouble
appears and the handset cord of the voice terminal with no trouble (see
Figure 13).
HANDSET CORD
HANDSET CORD
(VOICE TERMINAL
(VOICE TERMINAL
WITHOUT TROUBLE)
WITH TROUBLE)
Figure 13—Switching Handset Cords
Page 37
To Next Page
Loading...
Need help?
General
