MERLIN MLX
Telephone Wiring
C
When the MERLIN
®
Identifier is used with a MERLIN LEGEND
®
system having MLX™ sets, a pair of installer-wired 104A
termination outlets is required for each MLX set to be connected
to a MERLIN Identifier Display unit.
Figure 9 shows the location of the 104A termination outlets with
respect to the other MERLIN Identifier system components.
Figure 10 shows the internal “strapping” required for the 104A
termination outlets.
Controller
MERLIN MLX
End
Set
104A
Display
To
MERLIN Identifier
End
MERLIN LEGEND
104A
Control Unit
1 2
Controller
MLX Station Module
1 2
MERLIN Identifier
Display
Inside Wiring
Figure 9.
MERLIN Identifier Cabling for MERLIN LEGEND
MLX Sets
MERLIN MLX Telephone Wiring
59
To Next Page
Loading...
Need help?
General
