ATEN CS1922M - Auto Scan Mode Operation

Chapter 3. Basic Operation
15
Alternative Manual Port Selection Settings
When Hotkey Setting Mode has been activated (page 32), pressing [S] will
invoke the alternative front panel pushbutton manual port selection functions,
as explained below:
 Press a port selection pushbutton once to bring only the KVM focus to the
computer attached to its corresponding port.
 Press a port selection pushbutton twice to bring the audio focus to the
computer attached to its corresponding port.
 Press and hold a port selection pushbutton for more than 2 seconds to
bring the KVM, audio and USB focus to the computer attached to its
corresponding port.
 Press and hold port selection pushbuttons 1 and 2 for more than 2 seconds
to start Auto Scan Mode, see page 25 for details.