CS1922M / CS1924M User Manual
2
Features
2/4-port DisplayPort KVMP Switch with USB 3.1 Gen 1 hub and 2.1
surround sound audio
One USB console controls 2/4 computers and two USB peripherals
Computer selection via front panel pushbuttons, hotkeys, RS-232
commands, and mouse
1
Independent switching of KVM, USB hub and audio focus
Superior video quality – 4K UHD (3840 x 2160 @ 60 Hz) and 4K DCI
(4096 x 2160 @ 60 Hz)
2-port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps transfer rates
DisplayPort 1.2 compliant
2
, HDCP 1.3 compliant
Supports HD audio through DisplayPort
3
Full bass response for high-quality 2.1 channel surround sound systems
Power On Detection – if a computer is powered off the CS1922M /
CS1924M automatically switches to the next powered-on computer
Built-in Multi-Stream Transport (MST) hub – allows multiple monitors
through a single DisplayPort source
4
DisplayPort Dual-Mode (DP++) technology supports passive HDMI and
DVI adapters
5
Hot pluggable – add or remove computers without powering down the
switch
Mouse emulation/bypass feature supports most mouse drivers and
multifunction mice
Multi-platform support – Windows 2000, Windows XP, Windows Vista,
Windows 7/8 and higher, Mac, and Linux
Multilingual keyboard mapping supports English, Japanese, French and
German keyboards
Mac keyboard support and emulation
6
Auto Scan Mode for monitoring all computers
Firmware upgradeable
Note: 1. Mouse port switching is only supported under mouse emulation
mode with a USB 3-button mouse wheel.
To Next Page
Loading...
Need help?
General
