Need help?Do you have a question about the ATEN Master View CS1308 and is the answer not in the manual?
General| Device Type | KVM Switch |
|---|---|
| Ports | 8 |
| Max Resolution | 2048 x 1536 |
| Video Bandwidth | 350 MHz |
| Daisy Chain | No |
| Number of ports | 8 |
| Console Connections | 1 |
| Operating Temperature | 0 - 50°C |
| Storage Temperature | -20 - 60°C |
| Humidity | 0 - 80% RH, Non-condensing |
| Connectors | 8 x SPHD-15 Female (Yellow) |
| Computer Connections | 8 |
| Console Ports | 1 x SPHD-15 Female |
| Video Resolution | 2048 x 1536 |
| Power Consumption (DC) | 5W |
| Dimensions (mm) | 437.2 x 160 x 44 mm |
| Power Consumption (AC) | 5W |
Register your ATEN product online for support and updates.
Contact ATEN support via phone for assistance with your device.
Introduction to the CS1308/CS1316 KVM switch, its capabilities, and benefits.
Detailed list of the CS1308/CS1316 KVM switch's key features and functionalities.
Hardware and software prerequisites for setting up and using the CS1308/CS1316 KVM switch.
Specifications for the monitor, keyboard, and mouse needed for the KVM console.
Hardware requirements for each computer connected to the CS1308/CS1316.
Details on the specific KVM cables required for connecting computers to the switch.
List of operating systems compatible with the CS1308/CS1316 KVM switch.
Identification and description of the CS1308/CS1316 KVM switch's components.
Description of the ports, buttons, and LEDs on the front of the CS1308/CS1316.
Description of the ports and connectors on the rear of the CS1308/CS1316.
General introduction to the hardware setup process for the CS1308/CS1316 KVM switch.
Important safety and preparation steps before starting the CS1308/CS1316 installation.
Instructions for placing the CS1308/CS1316 on a desktop or mounting it in a rack.
Procedures for stacking the CS1308/CS1316 on a level surface for operation.
Steps for attaching rack mounting brackets to the front of the CS1308/CS1316.
Steps for attaching rack mounting brackets to the rear of the CS1308/CS1316.
Instructions for properly grounding the CS1308/CS1316 to prevent damage.
Step-by-step guide for setting up a basic, non-cascaded CS1308/CS1316 installation.
Visual guides illustrating console and KVM cable connections for the CS1308/CS1316.
Instructions for cascading CS1308/CS1316 units for expanded computer control.
Procedures for adding or removing KVM components without shutting down the system.
Overview of how to switch between connected computers using manual, OSD, or hotkey methods.
How to switch between connected computers using the front panel pushbuttons.
Understanding the unique ID assigned to each port for computer access.
Procedure for safely powering down and restarting the CS1308/CS1316 and connected computers.
Introduction to the On-Screen Display (OSD) and the login process with password security.
How to display the OSD using the designated hotkey combination.
Explanation of the OSD main screen layout, including port lists and status indicators.
How to navigate and interact with the OSD menus and port lists.
Details on the information displayed in the PN, QV, and NAME columns of the OSD.
Methods for dismissing menus, logging out, and moving through OSD lists.
Overview of the configurable functions available within the OSD for managing the KVM.
How to directly switch to a specific computer port using its name or Port ID.
How to filter and view specific ports (ALL, QUICK VIEW, POWERED ON) in the OSD.
Configuration settings for OSD hotkey, port ID display, scan duration, and other preferences.
Administrator-specific functions for user management, port access rights, and system settings.
How to manually skip between available computer ports using hotkeys.
Enables broadcasting commands to all connected computers simultaneously.
How to automatically cycle through connected computers for monitoring.
How to log out of the OSD session and return to the login screen.
Introduction to controlling KVM focus and settings directly from the keyboard.
Methods for entering and exiting Hotkey mode for command input.
Specific hotkey sequence to invoke Hotkey mode using Num Lock and the minus key.
Alternative hotkey sequence to invoke Hotkey mode using Ctrl and F12.
How to switch to a specific computer port by entering its Port ID in Hotkey mode.
How to automatically scan through connected computers at set intervals.
Steps to start the Auto Scan feature using hotkey combinations.
How to manually step through connected computers using arrow keys in Skip mode.
Procedure to reset the keyboard or mouse connection to a specific computer.
How to toggle the audible beep notification on/off using hotkeys.
How to switch between different hotkey invocation methods.
How to toggle between different OSD hotkey combinations.
How to set the OS type for each connected computer port.
Procedure to restore the KVM switch to its factory default configuration.
Mapping PC keyboard keys to emulate Mac keyboard functions for KVM control.
Mapping PC keyboard keys to emulate Sun keyboard functions for KVM control.
Purpose and overview of the utility for upgrading the CS1308/CS1316 firmware.
Steps to download the latest firmware upgrade package from the ATEN website.
Steps required to prepare the system and connect for a firmware upgrade.
How to launch the firmware upgrade utility and begin the upgrade.
Confirmation screen displayed when the firmware upgrade is completed successfully.
Information on what to do if the firmware upgrade process fails.
Steps to recover from a failed firmware upgrade or aborted process.
General safety guidelines for operating and installing the KVM switch.
Important safety rules for product usage, placement, and environmental considerations.
Best practices and safety considerations for installing the KVM in a server rack.
Contact details and resources for obtaining technical assistance from ATEN.
ATEN's online support portal and general contact information for international users.
Specific contact details for technical support in North America.
Technical specifications for the CS1308 and CS1316 KVM switches, including ports, power, and dimensions.
Tables showing the relationship between the number of switches and computers for cascading.
List of ATEN KVM switches compatible with the CS1308/CS1316 for expansion.
Procedure to reset the CS1308/CS1316 to its original factory default configuration.
List of the default settings for the On-Screen Display (OSD) menu.
Information about the specific SPHD connectors used for KVM and console ports.
Solutions for common problems like erratic behavior or unresponsive keyboard/mouse.
Details on the warranty coverage and terms for the CS1308/CS1316 KVM switch.
To Next Page
