3 运输，装载，存放
3.1 包装和拆箱
依照运送条件， 机器可以以不同方式运送。
- 机器用透明的塑料膜包裹。.
- 机器放置在木头栈板上并由透明塑料膜包
装。
- 机器由大小适合的木条箱包装。
- 机器放置在木头栈板上，并由硬纸板纸箱
保护。(标准包装)
机器抵达现场后， 检查包装有没有受损。 拆开包
装时，尽可能让机器距离安装现场越近越好。
机器的运送方式需根据机器的大小，重量,
外型，它的零件而决定，升起抬高机器的设
备需 大于机器的重量。
注意: 如果发现有受损或遗失零件，需告知客服中
心及运送单位，提供相关 的图片文件。检查有无
小零件被放在硬纸箱内， 详细检查机器的状况。
各种包装材料的处理必须按照目前的环保法规。
在装卸过程中，必须有助手在旁协助，在过
程中提供任何必要的指示
不正确的操作，不合格的人员或使用不适当
的手段造成损害不负任何责任。
3 TRANSPORT-HANDLING-
STORAGE
3.1
PACkING AND UNPACkING
The machine may be shipped in different ways depending
on the transport requirements:
-
Unpacked machine protected by transparent plastic
wrapping.
-
Machine on a wooden pallet and protected by
transparent plastic wrapping.
-
Machine packed in a wooden crate of suitable
dimensions.
-
Machine on a wooden pallet and protected by a self-
supporting cardboard box (standard packaging).
Upon taking delivery of the machine, check that the
packaging has not been damaged during transport or that
it has not been tampered with and parts removed. Move
the packed machine as close as possible to the place of
installation and start unpacking, carefully checking that
the supply corresponds to the order specifications.
THE LIFTING AND TRANSPORT MEANS
MUST BE CHOSEN BASED ON THE SIZE,
WEIGHT AND SHAPE OF THE MACHINE
AND ITS COMPONENTS. THE CAPACITY
OF THE LIFTING EQUIPMENT MUST BE
GREATER (WITH A SAFETY MARGIN) THAN
THE WEIGHT OF THE COMPONENTS TO
BE TRANSPORTED.
N.B.:If damaged or missing parts are found, notify
Customer Service and the carrier immediately, providing
photographic documentation.
Check that no small parts of the machine are left in the
cardboard boxes.
Make a detailed examination of the general conditions
of the machine.
The various packing materials must be disposed of
in accordance with current environmental protection
regulations.
DURING UNLOADING AND HANDLING
OPERATIONS, AN ASSISTANT MUST BE
ON HAND TO GIVE ANY NECESSARY
DIRECTIONS DURING TRANSPORT.
THE M ANU FACT UR ER DECL INE S
ALL RESPONSIBILITY FOR DAMAGE
CAUSED BY INCORRECT OPERATIONS,
UNQUALIFIED PERSONNEL OR THE USE
OF UNSUITABLE MEANS.
To Next Page
Loading...
