Atlantic 024306 - Page 63

- 63 -
Auxiliary functions
Relay test
Outd. T° simulation
Reset factory confi guration
- "HP circulation pump": ON / ----
- "Elec. backup 1": ON / ----
- "Area 2 circulation pump": ON / ----
- "Mixing valve": Open / Close / ----
- "DHW valve": DHW / ----
- "DHW backup": ON / ----
- "Boiler connection": ON / ----
- "Boiler connection ON / Stop": ON / ----
Don't forget to deactivate them after the tests.
Relay test
HP circulation pump
Elec. backup 1
Area 2 circulation pump
Mixing valve
DHW valve
DHW backup
----
----
----
----
----
----
- "Simulated Outd. T°" : -50°C... 50°C.
Outd. T° simulation
Simulated Outd. T°
---
The factory settings, stored within the controller,
will replace and delete any custom programs.
Your custom settings will therefore be lost.
Reset factory confi guration
Reset factory confi guration
Alfea Extensa A.I. R32 / INSTALLATION / 2114 - EN