- 62 -
►
Auxiliary functions
Auxiliary functions
Floor drying
- Choose the zone.
- Choose the "Drying type": Stop / Automatic / Manual.
• Automatic Drying
50
45
40
35
30
20
25
55
X
01 5 10 181
57
Heating fl ow temperature °C
Automatic Drying
Day
Max fl ow T°
• Manual Drying
Manual mode enables you to programme your own concrete slab drying time.
The function ends automatically after 25 days.
- Set the "Flow T° setpoint": 15°C... 60°C.
Please comply with the standards and instructions of the manufacturer of the
building ! A good performance of this function is only possible with an installation
correctly implemented (hydraulic, electricity and adjustments) ! This function can
be stopped by anticipation when setting the adjustment to "Off ".
Area 1 fl oor drying
Drying type
Stop
Flow T° setpoint 25°C
Alfea Extensa A.I. R32 / INSTALLATION / 2114 - EN
To Next Page
Loading...
