Text on image
(1)
General
(2)
Element Outlet
(3)
Level High
(4)
Shutd.Warn.
(5)
Shutdown
(6)
Reset
Other shutdown causes
• In case the compressor is shut down by one of following causes:
• Too high element outlet temperature, detected by temperature switch (TSHH11) or additional
temperature switch (TSHH21).
• Overload of the compressor motor (M1) or the fan motor (M2).
• Incorrect phase sequence, detected by phase sequence relay (K25).
Following screen will appear:
Text on image
(1)
General
(2)
Overload Motor/Fan Motor
(3)
Open
(4)
Shutdown
(5)
Open
(6)
Reset
• In case of the outlet pressure sensor error, following screen will appear:
Instruction book
78 2920 7140 90
To Next Page
Loading...
