Example: Suppose that you already added two IP addresses (192.168.100.1 and 192.168.100.2). Now
you add 192.168.100.100 and separate the 3 IP addresses by putting semicolons between them (1)
(see picture).
Click OK (2) to close the window.
Viewing the controller data
All screen shots are indicative. The number of displayed fields depends on the selected
options.
• Open your browser and type the IP address of the controller you want to view in your browser (in this
example http://192.168.100.100). The interface opens:
Instruction book
2920 7109 23 67
To Next Page
Loading...
