Service EN POWER FOCUS 600
12
© Atlas Copco Industrial Technique AB - 9836 6534 01
Contact your Atlas Copco service technician for cleaning advice as per current recommendations and for
your particular tool.
Regular Cable Inspections
Regularly inspect the power cable and the tool cable. If the cables show any sign of damage, replace
them.
Repair Instructions
Wiring
If it is necessary to change the plug on the mains cable, use the following wiring guide:
Color Input
Brown or black Live
Blue Neutral
Green and yellow Protective ground
Warning! The power cable is the main disconnecting device. Before you open a Power Focus unit make
sure that the power cable is unplugged.
Warning! Do not use galvanically insulated line voltage, since it disrupts the function of the Ground Fault
Interrupter (GFI). The test button for the GFI activates the GFI even if the power supply is from an isolated
transformer.
Warning! If the power supply cable needs to be replaced, only use an Atlas Copco original replacement
cord. Use of another cable may result in dangerous situations.
To Next Page
Loading...
