Atlas Copco Power Focus 600 - Socket Selector; Operator Panel; Stacklight; Scanner

Product Information EN POWER FOCUS 600
4
© Atlas Copco Industrial Technique AB - 9836 6534 01
■
Installation, Operation and Service Instructions
■
Spare Parts Lists
■
Accessories
■
Dimensional Drawings
Please visit: https://servaid.atlascopco.com.
For further Technical Information, please contact your local Atlas Copco representative.
Website
Information concerning our Products, Accessories, Spare Parts and Published Matters can be found on
the Atlas Copco website.
Please visit: www.atlascopco.com.
Safety Data Sheets MSDS/SDS
The Safety Data Sheets describe the chemical products sold by Atlas Copco.
Please consult the Atlas Copco website for more information www.atlascopco.com/sds.
Country of Origin
For the Country of Origin, please refer to the information on the product label.
Dimensional Drawings
Dimensions Drawings can be found either in the Dimensional Drawings Archive, or on ServAid.
Please visit: http://webbox.atlascopco.com/webbox/dimdrw or https://servaid.atlascopco.com.
Overview
Technical data
Weight 10 kg
Length 292 mm
Width 146 mm
Height 325 mm
Power rating 1500 W
Line voltage 100-120 / 200-240 V
Power
Power Focus operates on a single-phase 115 or 230 V a.c. line voltage.
Power Focus has a function for sensing the line voltage automatically. This means that the Power Focus
automatically switches to the voltage you connect to it.
Power consumption
Power consumption depends on the speed and torque of the tool. High speed and torque increase power
consumption.
Tool Off mode [W] Idle mode [W] Power [W]
ES21 <0.5 <20 1040
ES61 <0.5 <20 1250